1. Locate the bracket
There are 2 adhesive strips on the back of the bracket. Remove the protective tape and hold the bracket with the longer angled slots at the top.
2. Position and fix the bracket
Make sure the bracket is positioned high enough for a good view of the street, and where you can see the screen. Make sure it is as level as you can.
3. Press the bracket firmly to the window
Press firmly on the bracket with both hands for 30 seconds to secure it in place.
4. Hang your Telraam to the bracket
Slip the device over the bracket by aligning the holes on the device to the hooks.
5. Power your Telraam
Plug the power cord into the bottom of the device, then into a wall outlet.
Next: Step 5
