Your camera cable is disconnected from the camera and/or from the Raspberry Pi (mini computer in the black box) and you want to reassemble it.
Step 1 - connect camera cable to the camera
1️⃣ Take the shortest part of the camera holder
2️⃣ Take the camera cable with the 'white metal teeth' facing you
3️⃣ Insert the cable through the camera holder opening
4️⃣ Open the black border in the holder
5️⃣ Insert the camera cable into the opening
6️⃣ Close the black edge, this will secure the cable in the camera
7️⃣ Push the camera into the camera mount
Step 2 - Mount the camera holder
8️⃣ Mount the camera holder. Take the other 'Counting frame' part and connect it to the shorter camera holder piece. Insert the screw in the smallest opening and the bolt on the other side.
Step 3 - Connect camera cable to the Raspberry Pi
9️⃣ Take the Raspberry Pi and locate the part where you will soon plug in the camera cable (see video)
🔟 Carefully open the black border of this
1️⃣1️⃣ Insert the camera cable into the Raspberry Pi
1️⃣2️⃣ Close the black border
1️⃣3️⃣ Close the Raspberry Pi
What can you do next?
➡️ Reposition your camera. Follow the steps in this article: Check or update the camera view
❗️ Do you have an older model of the camera stand? Watch the instructions here:❌ You completed all the steps and there is still a problem with your camera? Send us an email: support@telraam.net.
