Classification of objects with Telraam S2
Our Telraam S2 sensor can differentiate between ten different road user categories: - Bicycle - Bus - Car - Light truck - Motorcycle - Pedestrian......
Data performance and validation
We are continuously working on improving the AI which is responsible for the traffic counts. This is a never-ending process, but to be completely transparent,......
Speed measurements with Telraam S2
How does Telraam S2 measure speed Telraam S2 - just like our original sensor, the Raspberry Pi-based Telraam V1 - cannot measure speed directly like......
Potential inaccuracies with Telraam S2
While Telraam S2 is much less susceptible to circumstances that could cause the traffic counts to be inaccurate, there are still some factors that may......
How to turn off the LED screen of my Telraam S2
Hold down the blue button for approximately 3 seconds, and the LED display will switch off. It's as simple as that!...
Nightcounts with Telraam S2
Let's shed some light on how Telraam's night counts differ from its daytime operations, focusing on the unique challenges and adaptations necessary for nocturnal data......
Telraam S2 count validations - a step-by-step guide
If you're a Telraam S2 user and want to check how accurate your device is, read on. In the majority of circumstances Telraam S2 should......
Region of interest (ROI) and ROI selection with Telraam S2
This article explores the selection of a Region on interest for the Telraam S2 device. Further in this article you can find: - An explanation......
Troubleshooting with the S2
You completed the installation procedure but the device has issues
ROI selection failure
Image does not load and/or counts stop
